mobi
 
 
Current location:Home > Blogs > Technical documentation >
 

NewsDetails

 

Pressure Rating of Pipe and Fittings Explained

author:David Miller time:2026-11-17 18:53:30 Click:0

Pressure rating tells you how much internal pressure a pipe, flange or fitting can safely handle at a given temperature. It is one of the most important specifications in piping design.

1. Rating Systems

  • Class (ANSI/ASME) — Class 150, 300, 600, 900, 1500, 2500. Used in North America.
  • PN (European/DIN) — PN6, PN10, PN16, PN25, PN40. Used in Europe and Asia.
  • Schedule (pipe) — for seamless pipe, wall thickness determines pressure rating.

Slip On Flange

2. Temperature Effect

The pressure rating decreases as temperature rises. A Class 150 flange rated for 150 psi at room temperature may only handle 45 psi at 400°C. Always consult the pressure-temperature rating chart for the specific material.

3. Matching Components

All components in a joint should have the same or higher rating. Never mix a Class 150 flange with a Class 300 valve in the same joint. The lowest-rated component determines the joint's capacity.

Pressure-Temperature Rating Charts

Every flange standard provides pressure-temperature rating charts. The chart shows the maximum allowable pressure at each temperature for a given material and class. Always consult the chart for your specific operating temperature before selecting flanges.

Pressure-Temperature Rating Charts

Every flange standard provides pressure-temperature rating charts. The chart shows the maximum allowable pressure at each temperature for a given material and class. For example, a Class 150 A105 flange rated for 285 psi at 100°F may only handle 150 psi at 500°F. Always consult the chart for your specific operating temperature before selecting flanges.

Class vs PN Rating Systems

The US uses Class ratings (150#, 300#, 600#, etc.), while Europe and much of Asia use PN ratings (PN10, PN16, PN25, etc.). They are not directly equivalent, but rough approximations exist. Class 150 ≈ PN20, Class 300 ≈ PN50, Class 600 ≈ PN110. Always specify which system you are using on the drawing, and never mix components from different rating systems without consulting a pressure-temperature chart.

Class (ANSI) Approx. PN (DIN) Working Pressure (CS, RT)
Class 150PN2019.6 bar / 285 psi
Class 300PN5051 bar / 740 psi
Class 600PN110102 bar / 1480 psi
Class 900PN150154 bar / 2235 psi

Pressure Rating FAQ

Answers to the most common questions about pipe and fitting pressure ratings.

  • What does Class 150 mean? — Class 150 is a pressure rating designation (from ASME B16.5). It means the flange or fitting can handle approximately 150 psi at room temperature. The actual rating decreases as temperature rises.
  • How does temperature affect pressure rating? — Pressure capacity decreases as temperature increases. A Class 150 carbon steel flange rated for 285 psi at 100°F may only handle 150 psi at 500°F. Always consult the pressure-temperature rating chart.
  • What is the difference between Class and PN? — Class (150#, 300#, etc.) is the US/ANSI system. PN (PN10, PN16, etc.) is the European/DIN system. Rough equivalents: Class 150 ≈ PN20, Class 300 ≈ PN50. Never mix components from different systems without checking the rating chart.
  • What pressure rating do I need? — The fitting must be rated for at least the design pressure at the maximum operating temperature. Always include a safety margin (typically 25–50%).
  • Is the pipe pressure rating the same as the fitting? — Not necessarily. The joint is only as strong as its weakest component. A Class 300 flange on a Class 150 valve means the joint is Class 150.

Pressure-Temperature Rating Table

Here is a quick reference for carbon steel (A105) flange pressure ratings at different temperatures: Class 150: 285 psi at 100°F, 170 psi at 500°F, 95 psi at 800°F. Class 300: 740 psi at 100°F, 665 psi at 500°F, 480 psi at 800°F. Always use the exact rating chart for your material.

Writer Michael Chen

Michael Chen is a technical writer and engineer with over 12 years of experience in the industry. He specializes in technical documentation, product specification and application engineering. Michael Chen holds a Bachelor's degree in Mechanical Engineering and has contributed to numerous technical publications on pipeline design, corrosion protection and industrial solutions.

联系 Contact us

——  Contact:Manager

——  Tel:+86 15231788966

——  Email:info@zhantongpipe.com

——  Url:https://www.zhantongpipe.com

——  Address:Mengcun Hui Autonomous County, Cangzhou City, Hebei Province

contact usAddress:Mengcun Hui Autonomous County, Cangzhou City, Hebei Province
contact usMobile:+86 15231788966
contact usWhatsapp:+86 15231788966
Copyright © 2025-2026 https://www.zhantongpipe.com. All Rights Reserved Hebei Zhantong Pipeline Equipment Manufacturing Co., Ltd
Mobile terminal
contact